SUPPORT: 403.567.0676
Product Highlights:
The Radial J48™ direct box is the world’s finest phantom-powered active DI. It has been optimized to handle extreme transients using only the 5 milliamps of available current from typical 48-Volt
phantom-power. The J48 features a unique digital switch-mode power supply that steps up the internal rail voltage to an amazing 9-Volts.
Most battery-powered guitars and basses are active and will produce as much as 7-Volts when played at maximum volume. Since typical direct boxes are only able to handle about 3 volts, they
choke. The trouble is caused when the input signal is greater than the internal rail voltage. This creates all types of distortion: bass sounds thin and lacks punch, guitars sound scratchy and tend
to have sporadic peaks, and they lose their natural body resonance.
Because the J48 has more ‘horse-power” (current to work with), it is able to handle these transients without choking. This extra headroom significantly reduces harmonic, phase and inter-modulation distortion. And when you fix all of the problems, a funny thing occurs… you get great sound!
Features
• Superior dynamic headroom
• High input impedance reduces loading
• Merge switch sums stereo instruments to mono
• Low-cut filter, -15 dB PAD, and polarity reverse
Applications
• Provides extra ‘reach’ and ‘air’ in your sound!
• Ideal for active acoustic guitars and basses
• Great for keyboards and drum modules
• Equally wonderful for live or studio
Cool stuff
• Huge 9-Volt internal rail voltage for extra headroom
• Handles loud transients without choking or clipping
• No batteries required, works with phantom-power
Specifications | ||
---|---|---|
Audio circuit type: | Proprietary analog circuit with low-noise op-amp | |
Frequency response: | 20Hz ~ 20kHz | |
Dynamic range: | 109dB | |
Total harmonic distortion: | 0.002% @ -5dBu | |
Intermodulation Distortion: | 0.003% @ -3dBu | |
Phase Deviation: | +10º at 20Hz | 0º at 1kHz | -1º at 20kHz | |
Input Impedance: | 220kΩ – ¼” input | |
Output Impedance: | 200Ω – XLR output | |
Equivalent Input Noise: | -103dBu | |
Noise Floor: | -99dB below 0dBu | |
Maximum Input: | +10dBu | |
Features | ||
Input pad, Mono Sum, 180° polarity reverse, Ground lift, HPF | ||
Input Connectors: | 1/4″ | |
Output Connectors: | Balanced XLR, 1/4″ Thru | |
General | ||
Construction: | 14 gauge steel chassis and outer shell | |
Size (L x W x D): | 3.3″ x 5.0″ x 2″ (84 x 127 x 48mm) | |
Weight: | 1.55 lb (720 g) | |
Power: | 48V phantom – proprietary digital switching | |
Conditions: | For use in dry locations only between 5°C and 40°C |
Model: AUEVSX
Model: AUBEUM
Model: RAMOCD